4. The Sample Jobs
252 RS7000
2KEY (Key Number)............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be remixed.
3TYPE.........................................................................[Knob 3]
[Settings] 1 ~ 5
Specifies the degree to which the looped portion of the sam-
ple will be sliced.
4VARIATION............................................................[Knob 4]
[Settings] NORMAL 1, NORMAL 2, REVERSE 1,
REVERSE 2
NORMAL1........ The original data is sliced and rear-
ranged only.
NORMAL2........ A variation of NORMAL 1.
REVERSE1.......In addition to slicing and rearrange-
ment, some portions of the sample
will be played in reverse.
REVERSE2.......A variation of REVERSE 1.
Determines how the original sample is varied by the loop
remix job.
5AUDITION.......................................................................[F2]
Plays the specified sample.
Plays the processed sample if pressed after [F4] (DO!) is
pressed to remix the sample.
6DO!....................................................................................[F4]
Executes the job. Random results will be produced each time
the [F4] button is pressed.
7CREATE..........................................................................[F3]
Saves the processed sample to the target sample number,
overwriting the original sample.
If the original sample is a Pitched Sample it will be overwrit-
ten at this point. If the original sample is part of a Sample Kit
Voice a key-number selection page will appear.
8CREATE TO
(Destination Key Number)............................ [Knob 2]
[Settings] C-2 ~ G8
Specifies the key number to which the processed sample will
be saved.
9OK.....................................................................................[F3]
Saves the processed sample to the specified destination key
number.
The sample is divided into a number of “slices”, the size of which
is determined by the specified note length.
At the same time the note data required to reproduce the sliced
sample is inserted at the beginning of the currently selected mea-
sure in the currently selected track (or from the beginning of the
currently selected phrase in the PATTERN mode).
■Sample Selection Display
1SAMPLE (Sample Number).......................... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be sliced.
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
98
[Knob 2] [F3]
NOTE
Loop Remix is intended to be used for remixing
single samples, and will not work on an entire
sliced sample voice.
Tracks containing sliced sample voices can be
remixed using the Real Time Loop Remix func-
tion.
12 SLICE
Original Sample
Slice
Sliced Sample
Note Data
Current Measure
E0 F0 F#0 G0
E0
F0 F#0
G0
412
3
[Knob 1] [Knob 2] [F2] [F4]