4. The Sample Jobs
RS7000 251
5
The Sampling Mode
6CREATE TO
(Destination Key Number).............................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number to which the processed sample will
be saved.
7OK......................................................................................[F3]
Saves the processed sample to the specified destination key
number.
Converts a stereo sample to a mono sample.
1SAMPLE (Sample Number)...........................[Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be converted.
2KEY (Key Number)............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be converted.
3TYPE.........................................................................[Knob 3]
[Settings] L+R>MONO, L>MONO, R>MONO
L+R>MONO......The left and right channels of the ste-
reo sample are mixed and converted
to a mono sample.
L>MONO...........The left channel on the stereo sample
is converted to a mono sample.
R>MONO..........The right channel on the stereo sam-
ple is converted to a mono sample.
Specifies which channel, or both channels, of the stereo sam-
ple will be converted to a mono sample.
4AUDITION.......................................................................[F2]
Plays the specified sample.
Plays the processed sample if pressed after [F4] (DO!) is
pressed to convert the sample.
5DO!................................................................................... [F4]
Executes the job.
6CREATE......................................................................... [F3]
Saves the processed sample to the target sample number,
overwriting the original sample.
If the original sample is a Pitched Sample it will be overwrit-
ten at this point. If the original sample is part of a Sample Kit
Voice a key-number selection page will appear.
7CREATE TO
(Destination Key Number)............................ [Knob 2]
[Settings] C-2 ~ G8
Specifies the key number to which the processed sample will
be saved.
8OK.....................................................................................[F3]
Saves the processed sample to the specified destination key
number.
Slices and randomly rearranges the selected sample while also
changing the sound of some portions to create totally new varia-
tions.
This job is effective when used with accurately-extracted 1 or 2-
measure break-beats or phrase samples. Before using the Loop
Remix job, set the loop start and end points in the Trim page, and
then use the sample Extract job.
1SAMPLE (Sample Number).......................... [Knob 1]
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be remixed.
10 STEREO TO MONONOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
5
6
12 3
4
[Knob 1] [Knob 2] [Knob 3] [F4]
[F2] [F3]
11 LOOP REMIX
87
[Knob 2] [F3]
67 412 3
5
[Knob 1] [Knob 2] [Knob 3] [Knob 4]
[F2] [F3] [F4]