2
The Pattern Mode
7. Adjusting Level and Effects for Each Track (Mixer)
RS7000 95
EQ TYPE = BOOST
EQ TYPE = LOW&HIGH
EQ TYPE = THRU
1EQ TYPE.................................................................[Knob 1]
[Settings] Low&High, PEQ, BOOST6, BOOST12,
BOOST18, THRU
Low&High ....... Independent control of Low and High
EQ bands.
PEQ...................Parametric Equalizer — provides con-
trol of center frequency and Q (band-
width) as well as boost/cut.
BOOST6........... Provides a 6-dB level boost.
BOOST12......... Provides a 12-dB level boost.
BOOST18......... Provides a 18-dB level boost.
THRU................The equalizer is bypassed.
Specifies the type of equalization to be applied to each track.
2Q (Bandwidth).....................................................[Knob 2]
[Settings] 0 ~ 31
Specifies the bandwidth, or range of frequencies, to be
affected by boost or cut when the PEQ type is selected.
The specified frequency range is centered at the specified EQ
frequency (below).
3FREQUENCY....................................................... [Knob 3]
[Settings] 139.7 Hz ~ 12.9 kHz
Sets the center (or cutoff) frequency of the frequency band to
be equalized.
4GAIN (Output Select).......................................[Knob 4]
[Settings] -32 ~ +32
Specifies the amount of boost or cut to be applied to the EQ
frequency band.
5LOW FREQ. (Low Frequency).....................[Knob 3]
[Settings] 50.1 Hz ~ 2.00 kHz
Sets the cutoff frequency for the EQ band adjusted by the
LOW GAIN parameter, below.
6LOW GAIN............................................................ [Knob 4]
[Settings] -32 ~ +32
Boosts or cuts the low frequency band, below the cutoff fre-
quency set by the LOW FREQ parameter, above.
7HIGH FREQ. (High Frequency)................... [Knob 2]
[Settings] 503.8 Hz ~ 10.1 kHz
Sets the cutoff frequency for the EQ band adjusted by the
HIGH GAIN parameter, below.
8HIGH GAIN............................................................[Knob 3]
[Settings] -32 ~ +32
Boosts or cuts the high frequency band, above the cutoff fre-
quency set by the HIGH FREQ parameter, above.
56
[Knob 4]
[Knob 3]
[F4]
7 8
[F1]
[Knob 2] [Knob 3]
Small Q
Frequency Frequency
Large Q
Equalizer
+
Gain
–