12. Loading from Memory Card or Disk
RS7000 209
4
The Song Mode
CARD or SCSI = SCSI
1FILE TYPE..............................................................[Knob 2]
[Settings] SONG, ALL, ALL+SYSTEM, SMPL
SONG....................A single song is loaded into the
specified style number in the inter-
nal memory from a SONG type
(.R2S) or ALL type (.R2A) file.
ALL....................... An ALL type (.R2A) file is loaded
and all internal memory except the
system setup data is overwritten.
ALL+SYSTEM...... An ALL type (.R2A) file is loaded
and all internal memory including
the system setup data is overwrit-
ten.
SMPL.................... A specified sample from multiple
sample voices included in a PATT
(.R2P), SONG (.R2S),or ALL (.R2A)
type file can be loaded to the speci-
fied sample voice number.
Specifies the type of data file to be loaded.
For details about the various file types see “About File
Types” on page 116.
2SCSI/CARD....................................................................[F1]
3OK......................................................................................[F4]
■Load Execution Page
[SONG] → [LOAD] → [F4]
FILE TYPE = SONG
FILE TYPE = ALL, ALL+SYSTEM
FILE TYPE = SMPL
4File Select............................................................. [Knob 1]
5SONG, TRACK.................................................... [Knob 4]
[Settings]
Song Select
(when FILE TYPE = SONG).................01 ~ 20
Track Select
(when FILE TYPE = SMPL).................01 ~ 16
• When the selected FILE TYPE is SONG.
Selects the song to which the data will be loaded.
The name of the selected song is displayed.
• When the selected FILE TYPE is SMPL.
Selects the track to which the data will be loaded.
If a sample voice is assigned to the selected track and the
number of the assigned sample is the same as that of the sam-
ple to be loaded, the “REPLACE” appears to indicate that the
existing sample will be replaced by the loaded sample. If no
sample voices are assigned to the selected track then an
empty sample voice number will be displayed and “EMPTY”
will appear to indicate that the sample will be loaded to
empty memory.
21 3
[Knob 2][F1] [F4]
Partition Name
SCSI ID
Disk Type Icon
4 7 5
[Knob 1] [F2] [Knob 4]
46 8
[F1] [F4][Knob 1]
46 87 5
[Knob 1] [Knob 4][F1] [F2] [F4]
Sample Voice Number