VIDEO PLAYBACK EN 21
Connections To A TV Or VCR | 1 Make sure all units are turned off. | |
2 Connect the camcorder to a TV or VCR as | ||
| ||
| shown in the illustration. | |
| If using a VCR, go to step 3. | |
| If not, go to step 4. | |
| 3 Connect the VCR output to the TV input, | |
To AV | referring to your VCR’s instruction manual. | |
connector | 4 Turn on the camcorder, the VCR and the TV. | |
Audio/Video | ||
5 Set the VCR to its AUX input mode, and set | ||
cable | ||
(provided) | the TV to its VIDEO mode. | |
| 6 Start playback on the camcorder. ( pg. 20) |
TV
VCR
1Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
2Red to AUDIO R IN*
3White to AUDIO L IN*
* Not required for watching still images only.
To choose whether or not the following displays appear on the connected TV
●Date/Time
Set “DATE/TIME” to “ON” or “OFF”. ( pg. 22, 25)
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 22, 25)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 22, 25)
NOTES:
÷It is recommended to use the AC Adapter as the power supply instead of the battery pack.
( pg. 13)
●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “REC”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.