Bosch Appliances WTMC 3510UC Electrical Connection, Gas, Grounding Instructions, Csa, Aga

Electrical

connection

You

will find

the rating

plate on the

connection

inside of the

front

panel.

Gas

GROUNDING

INSTRUCTIONS

d WARNING

d

This appliance must

be

grounded.

Explosion

hazard!

In the

event

of

a malfunction or

or

CSA

breakdown,

grounding

will

reduce

Use a new

AGA

approved

gas supply

line.

the risk

of

electrical

shock

by

Install

a

shutooff

valve.

providing

a

path of least resistance

Securely

tighten

all

gas

for the electric

current.

connections.

This appliance

features

a

cord with

Have a qualified person make

an equipmentogrounding conductor

sure gas pressure does not

and a grounding plug. The plug

exceed 14 in. W.C./

3.49 kPa/

must

be

plugged into an

Connection

specifications

as well

0.506

psig.

(Natural

and

appropriate outlet which has been

Propane

Gas).

as the electrical requirements are

properly installed and grounded in

stipulated on

the appliance

Example

of

a qualified

person

accordance

with

all local

nameplate.

include:

regulations

and

ordinances.

-

licensed

heating

personnel,

Make sure

that:

d WARNING

d

-

authorized

gas

supplier

-

the

power

cord

plug

fits into

the

personnel,

service

personnel.

socket.

-

authorized

Improper

connection

of

the

Failure to

do can

result

in

-

the

power

cord

is acceptable

equipment

grounding

conductor

explosion

or

fire.

may

result

in

electric shock.

for

use

in

this

application.

Risk

of

death or

injury!

must

Have

the

appliance

checked by

-

the

grounding system

is

All

gas

line

connections

be

tested for leaks prior to apo

a qualified

electrician

or

service

properly

installed.

pliance

operation.

Apply

soao

technician

if

you are in

doubt as

The

power

cord may be

replaced

by

water

to gas

line

conneco

to whether the dryer has been

an

electrician

only.

py

properly

grounded.

tions

and

check

for

formation

Replacement

power

cords are

of

new

bubbles.

Bubbles indio

Do not modify the plug provided

available

from

Customer

Service.

cate

leak!

with the

appliance -

if

it

will not

fit in

the outlet, have a proper outlet		Volts	Hertz	Amperes	Watts
installed by a qualified electrician	or 110-120		60	9	1080
exchange the cord with an

appropriate one rated for the dryer.

d WARNING d

The dryer must only be connected to an individual branch circuit via a socket which has been properly installed and grounded.

The household electrical voltage must correspond to the voltage specification on the dryer (rating plate).

When installing the gas supply to the gas dryer inlet pipe, do not exceed 310 lbf in (35 Nm).

d WARNING d

Never use an open flame to test for gas leaks.

Gas	type
This gas dryer when equipped for
use with NATURAL GAS, will
employ		an	orifice	size	46	and	have
a gas		outlet pressure			of	3.5	in. W.
This gas dryer when equipped for
use with PROPANE GAS, will
employ		an	orifice	size	of	1.21	mm,
and	have		a gas	outlet	pressure of
11	in.	W.C.
Your dryer			must	have	the	correct

valve for the type of gas in your home. Valve information is located on the rating plate behind the door below the drum.

If the ratingoplate information does not agree with the type of gas available, contact your dealer or our customer service team

(see page 25).

8