HSM HSM 411.2 operating instructions Installation, Inserting the bag for shredded material

Paper shredder HSM 411.2

Before taking off the cover, changing the location, cleaning or anything else other than normal operation turn off and unplug the paper shredder!

Maintenance and service work may be performed only by:

• HSM customer service

• specially trained staff (e.g. qualified electricians)

•service technicians from our contracting partners

Undo the wing screws securing the unit during transportation.

4. Installation

•This paper shredder should never be placed near or over a radiator or heat source.

•The ventilation slots must not be blocked or covered and they must be at a distance of at least 10 cm away from walls or furniture.

•Make sure the mains plug is easily acces- sible.

•Before plugging in the mains plug, check that the voltage and frequency of your local mains supply correspond to those stated on the type plate.

Inserting the bag for shredded material

•Open front door and pull out frame with bag for shredded material.

•Fold new bag around frame and allow to overlap by approx. 20 cm.

•Push frame with guide and bag into bottom frame.

•Close front door.

10 english 0603