Rep lacement Bobbins
Only use bobbins purchased through Sears Stores, stock No. 6870 or Sears Service Centers, Parts No. 102869107.
S
J
Bobbin Winding
•Removing the hook cover plate Hook cover plate release button
Hook cover plate
Slide the hook cover plate release button _ to the right, and remove the hook cover plate _.
\\
\
\
\
•Horizontal spool pin Spool pin
Large spool holder Small spool holder
Lift up the spool pin _. Place a spool of thread on the spool pin with the thread coming off the spool as shown. Attach the large spool holder _, and press it firmly against the spool of thread.
The small spool holder _ is used with narrow or small spools of thread.
•Additional spool pin Additional spool pin Spool pin hole Spool pin felt
The additional spool pin _ is for bobbin winding without unthreading the machine and for twin needle sewing. Insert the additional spool pin _ in the hole _.
Place the felt _ and a spool on the pin.
Y
f
J
J
14