Th reading th e Mach ine
S
•Threading the machine
*Raise the thread
*Raise the presser foot lifter.
*Place a spool on the spool pin, with the thread coming
off from the bottom toward the front of the sewing machine.
Draw the end of the thread around the upper thread guide.
While holding the thread near the spool, draw the end of the thread down around the check spring holder.
Firmly draw the thread up to the
Thread the needle from front to back, or use the
\ \
\
•Needle th reader
_I_Knob Hook
Guide
[] Lower thepresserfoot.Raisetheneedletoitshighest
positionPulldown. theneedlethreaderknob as faras it
willgo.
[] Turn the knob (_in the direction of the arrow in the illustration, and insert the hook _)into the needle eye. Lead the thread around the guide _)and under the hook (_.
[] Turn the knob _l]in the direction of the arrow in the illustration, drawing the thread loop through the needle.
[] Paying close attention to the needle point, draw the thread through the needle eye. You will find it helpful to use a pointed instrument, such as the seam ripper tip, to draw the thread through the needle eye.
%
J
F-
[]
[]
2O