GETTING READY TO SEW
Connecting Mach ine to Power Sup p ly
(_ Power supply plug Power switch Outlet
Machine socket (_ Machine plug (_ Light bulb
S
Before connecting the power cord, make sure the voltage and frequency shown on the machine conform to your electrical power.
1.Turn off the power switch @. Insert the foot control plug into the machine socket _.
2.Insert the power supply plug _ into the outlet _.
3.Turn the power switch @ to turn on the power and sewing lights.
Before Using Your Sewing Mach ine
Before using your sewing machine for the first time, place a waste fabric under the presser foot and run the machine with thread for a few minutes. Wipe away any oil which may appear.
ForYour Safety
*While in operation, always keep your eyes on the sewing area. Do not touch any moving parts such as the thread
*Always turn off the power switch and unplug from the power supply:
•When leaving the machine unattended.
•When attaching or removing any parts.
•When cleaning the machine.
*Do not place anything on the foot control, when not sewing.
Polariz ed Plug
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
Foot Controller Model
Controlling Sewing Speed
Sewing speed is varied by the foot control.
The harder you press on the foot control, the faster the machine runs.
J
f-
\\
J
S
J