• Inserting the bobbin | S |
|
End of thread
Notch
Notch
Threading diagram
Place a bobbin in the bobbin holder with the thread running off counterclockwise.
Guide the thread into the notch _ on the front side of the bobbin holder.
Draw | the thread to the left, sliding it between the tension | % |
spring | blades. |
|
Continue to draw the thread lightly until the thread slips into notch _. Pull out about 6" (15.0 cm) of thread.
Attach the hook cover plate. Check the threading by | % |
referring to the diagram _ shown on the hook cover plate. |
|
\
J
18