Table of Contents
|
|
| Page |
• | Getting Started Quickly | 12 | |
1 | Safety and Environment | 13 | |
| 1.1 | Safety | 13 |
| 1.2 | Environment | 13 |
2 | Description | 13 | |
| 2.1 | Introduction | 13 |
| 2.2 | Unpacking | 13 |
| 2.3 | Optional Accessories | 13 |
| 2.4 | General Description | 13 |
| 2.5 | IVA Individual Virtual Acoustics | 14 |
| 2.6 | Dolby Surround Pro Logic Decoder | 15 |
| 2.7 | LOGIC7 Decoder | 15 |
| 2.8 | Controls | 15 |
3 Audio and Power Connections | 17 | ||
| 3.1 | Connecting the Transmitter to Your Audio Source | 17 |
| 3.2 | Connecting the Transmitter to AC Power | 17 |
4 | Operating Notes | 17 | |
| 4.1 | Important Notes | 17 |
| 4.2 | Charging the Batteries in the Headphones | 17 |
| 4.3 | Discharging Rechargeable Batteries | 18 |
| 4.4 | Replacing Batteries | 18 |
| 4.5 | Setting Up the System | 18 |
| 4.6 | Digital Input | 18 |
| 4.7 | Playback Modes | 18 |
| 4.8 | SOUND Settings | 19 |
| 4.9 | Optional HEARO 888 DIGITAL Card | 19 |
| 4.10 Replacing Ear Pads (HEARO 777 QUADRA DELUXE) | 19 | |
5 | Cleaning | 19 | |
6 | Troubleshooting | 20 | |
7 | Specifications | 21 | |
| 7.1 | System Performance | 21 |
| 7.2 | Transmitter | 21 |
| 7.3 | Headphones | 21 |
| 7.4 | Standards | 21 |
| 7.5 | Dolby, Lexicon | 21 |
|
|
|
|
Getting Started Quickly
1Analog: Connect the AUDIO IN L and AUDIO IN R jacks on the transmitter rear panel to the headphone output or LINE output on your amplifier or DVD/CD player.
Digital: Refer to section 4.6 on page 18.
Connecting cables are included with your HEARO 888 DIGITAL.
Connect the cable on the supplied AC adapter to the DC 9 V jack on the transmitter rear panel and the adapter to a convenient power outlet.
Charge the batteries inside the headphones. Refer to section 4.2. Switch the transmitter on by pressing the ON switch.
Switch the headphones on by setting the OFF/ON switch to ON.
Set the frequency selector on the headphones and the FREQ selector on the transmitter to the same channel: ”FREQ 1”
12
HEARO 888 DIGITAL