Paradyne 9783 manuals

Computer Equipment > Network Router

When we buy new device such as Paradyne 9783 we often through away most of the documentation but the warranty. Very often issues with Paradyne 9783 begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Network Router Paradyne 9783 is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Network Router on our side using links below.

Paradyne 9783 Manual

166 pages1.54 Mb

3Contents
- About This Guide
- 1 Configuration Procedures
- 2 Basic Configuration
- 3 Configuration Options
  - 4ii
- 54 Feature-Specific Configuration
- Index
7About This Guide
- Purpose and Intended Audience
- Document Organization
  - vi
- 8Product-Related Documents
  - viii
- 10Conventions Used
  - Convention Used When Used
11Configuration Procedures
17Basic Configuration
- 2. Basic Configuration
- 2-2
- 18Using the Easy Install Feature
  - Easy Install Screen Example T3 Interface
  - 2. Basic Configuration
  - 9000-A2-GB31-00 December 2002 2-3
  - 19Easy Install Screen Example DDS Interface
  - Easy Install Screen Example DSL Interface
  - 202-4
    - 21Table 2-1. Easy Install Configuration Options (2 of 7)
  - 222-6
    - Table 2-1. Easy Install Configuration Options (3 of 7)
    - 23Table 2-1. Easy Install Configuration Options (4 of 7)
  - 242-8
    - Table 2-1. Easy Install Configuration Options (5 of 7)
    - 25Table 2-1. Easy Install Configuration Options (6 of 7)
  - 262-10
    - Table 2-1. Easy Install Configuration Options (7 of 7)
- 27Using RIP with FrameSaver SLV CSU/DSUs
  - 2-12
- 28Entering System Information and Setting the System Clock
- 29Setting Up Auto-Configuration
33Configuration Options
- Configuration Option Tables
  - 343-2
- 35Configuring the Overall System
  - Configuring Frame Relay and LMI for the System (CSU/DSUs)
    - 363-4
      - Table 3-1. System Frame Relay and LMI Options (2 of 4)
      - 37Table 3-1. System Frame Relay and LMI Options (3 of 4)
    - 383-6
      - Table 3-1. System Frame Relay and LMI Options (4 of 4)
  - 39Configuring PPP Options
    - 3-8
  - 40Configuring Class of Service Definitions
    - 3-10
  - 42Code Point Definitions
  - 43Configuring Service Level Verification Options
    - 443-12
      - Table 3-5. Service Level Verification Options (2 of 3)
      - 45Table 3-5. Service Level Verification Options (3 of 3)
    - 3-14
  - 46Configuring General System Options
    - 47Table 3-6. General System Options (2 of 3)
    - 483-16
      - Table 3-6. General System Options (3 of 3)
- 49Configuring Physical Interfaces
  - Configuring the Network Interface
    - 3-18
  - 50T1 Network Interface
    - 51Table 3-7. T1 Network Physical Interface Options (2 of 4)
    - 523-20
      - Table 3-7. T1 Network Physical Interface Options (3 of 4)
      - 53Table 3-7. T1 Network Physical Interface Options (4 of 4)
    - 3-22
  - 54T3 Network Interface
  - 55DDS Network Interface
    - 563-24
      - Table 3-9. DDS Network Physical Interface Options (2 of 2)
  - 57IDSL Network Interface
    - 3-26
  - 58SDSL Network Interface
  - 59SHDSL Network Interface
    - 3-28
  - 60Synchronous Network Interface
    - FrameSaver Models 9820-2M and 9820-8M have an EIA-530-A ne twork interface.
    - Table 3-12. SHDSL Network Physical Interface Options (2 of 2)
    - Table 3-13. Synchronous Network Data Port Physical Interface Options (1 of 2)
    - 61Table 3-13. Synchronous Network Data Port Physical Interface Options (2 of 2)
    - 3-30
  - 62HSSI Network Interface
  - 63Configuring a User Data Port (CSU/DSUs)
  - V.35 Data Port Physical Interface
    - 643-32
      - Table 3-15. V.35 Data Port Physical Interface Options (2 of 6)
      - 65Table 3-15. V.35 Data Port Physical Interface Options (3 of 6)
    - 663-34
      - Table 3-15. V.35 Data Port Physical Interface Options (4 of 6)
      - 67Table 3-15. V.35 Data Port Physical Interface Options (5 of 6)
    - 3-36
  - 68EIA-530-A/X.21/V.35 Data Port Physical Interface
    - Table 3-15. V.35 Data Port Physical Interface Options (6 of 6)
    - Table 3-16. EIA-530-A/X.21/V.35 Data Port Physical Interface Options (1 of 3)
    - 69Table 3-16. EIA-530-A/X.21/V.35 Data Port Physical Interface Options (2 of 3)
    - 3-38
  - 70HSSI Data Port Physical Interface
    - FrameSaver Model 9520 has two HSSI data ports, and Model 9820-45M has one.
    - Table 3-16. EIA-530-A/X.21/V.35 Data Port Physical Interface Options (3 of 3)
    - Table 3-17. HSSI Data Port Physical Interface Options (1 of 3)
    - 71Table 3-17. HSSI Data Port Physical Interface Options (2 of 3)
    - 723-40
      - Table 3-17. HSSI Data Port Physical Interface Options (3 of 3)
  - 73Configuring the T3 User Port (9520-ILM)
    - 3-42
  - 74Configuring the DSX-1 Interface (9126, 9128)
    - 75Table 3-19. DSX-1 Physical Interface Options (2 of 2)
    - 3-44
  - 76Configuring the ISDN DBM Interface (9126, 9128, 9626)
    - 783-46
      - Table 3-21. ISDN PRI DBM Physical Interface Options (9128) (2 of 3)
      - 79Table 3-21. ISDN PRI DBM Physical Interface Options (9128) (3 of 3)
    - 3-48
  - 80Setting Up ISDN Link Profiles (9126, 9128, 9626)
    - 81Table 3-22. ISDN Link Profile Options (2 of 3)
    - 3-50
- 82Assigning Time Slots/Cross Connections
  - 83Assigning Time Slots to the Network Interface
    - 3-52
  - 84Assigning DSX-1 Time Slots to the Network Interface
    - 863-54
    - 883-56
      - Table 3-23. Signaling and Trunk Conditioning Values (2 of 3) Network Side Meanings DSX-1 Side
      - 89Table 3-23. Signaling and Trunk Conditioning Values (3 of 3) Network Side Meanings DSX-1 Side
    - 3-58
  - 90Assigning a Synchronous Data Port to Network or DSX-1 Time Slots
  - 91Clearing Assignments
    - 3-60
- 92Configuring Frame Relay for an Interface
  - 93Table 3-24. Interface Frame Relay Options (2 of 3)
  - 943-62
    - Table 3-24. Interface Frame Relay Options (3 of 3)
- 95Configuring PPP for an Interface
  - 3-64
- 96Manually Configuring DLCI Records
  - - 97Table 3-26. DLCI Record Options (2 of 4)
  - 983-66
    - Table 3-26. DLCI Record Options (3 of 4)
    - 99Table 3-26. DLCI Record Options (4 of 4)
  - 3-68
- 100Configuring Circuit Records for the Network Interface
  - 101Table 3-27. Circuit Records Options (2 of 3)
  - 1023-70
    - Table 3-27. Circuit Records Options (3 of 3)
- 103Configuring ATM for the Network Interface
  - 3-72
- 104Configuring PVC Connections
  - 105Table 3-29. PVC Connection Options (2 of 4)
  - 1063-74
    - Table 3-29. PVC Connection Options (3 of 4)
    - 107Table 3-29. PVC Connection Options (4 of 4)
  - 3-76
- 108Configuring the IP Path List
- 109Setting Up Management and Communication Options
  - 3-78
  - 110Configuring Node IP Information
    - 111Table 3-31. Node IP Options (2 of 4)
    - 1123-80
      - Table 3-31. Node IP Options (3 of 4)
      - 113Table 3-31. Node IP Options (4 of 4)
    - 3-82
  - 114Configuring Management PVCs
    - 115Table 3-32. Management PVC Options (2 of 6)
    - 1163-84
      - Table 3-32. Management PVC Options (3 of 6)
      - 117Table 3-32. Management PVC Options (4 of 6)
    - 1183-86
      - Table 3-32. Management PVC Options (5 of 6)
      - 119Table 3-32. Management PVC Options (6 of 6)
    - 3-88
  - 120Configuring General SNMP Management
  - 121Configuring Telnet and/or FTP Session Support
    - 1223-90
      - Table 3-34. Telnet and FTP Session Options (1 of 2)
      - 123Table 3-34. Telnet and FTP Session Options (2 of 2)
    - 3-92
  - 124Configuring SNMP NMS Security
  - 125Configuring SNMP Traps and Trap Dial-Out
    - 1263-94
      - Table 3-36. SNMP Traps and Trap Dial-Out Options (2 of 6)
      - 127Table 3-36. SNMP Traps and Trap Dial-Out Options (3 of 6)
    - 1283-96
      - Table 3-36. SNMP Traps and Trap Dial-Out Options (4 of 6)
      - 129Table 3-36. SNMP Traps and Trap Dial-Out Options (5 of 6)
    - 1303-98
      - Table 3-36. SNMP Traps and Trap Dial-Out Options (6 of 6)
  - 131Configuring Ethernet Management
    - 1323-100
      - Table 3-37. Ethernet Management Options (2 of 2)
  - 133Configuring the Communication Port
    - Communication Port Table 3-38. Communication Port Options (1 of 5)
    - 1343-102
      - Table 3-38. Communication Port Options (2 of 5)
      - 135Table 3-38. Communication Port Options (3 of 5)
    - 1363-104
      - Table 3-38. Communication Port Options (4 of 5)
  - 137Configuring the Modem Port
    - Modem Port
    - Table 3-38. Communication Port Options (5 of 5)
    - Table 3-39. Modem Port Options (1 of 4)
    - 1383-106
      - Table 3-39. Modem Port Options (2 of 4)
      - 139Table 3-39. Modem Port Options (3 of 4)
    - 1403-108
      - Table 3-39. Modem Port Options (4 of 4)
- 141Configuring the Criteria for Automatic Backup
  - 1423-110
    - Table 3-40. Auto Backup Criteria Options (2 of 2)
143Feature-Specific Configuration
- 4-2
- 144Setting Up an External Modem
- 145Setting Up an Internal Modem
  - Setting Up Call Directories for Trap Dial-Out
    - 4-4
  - 146Setting Up to Use the Modem PassThru Feature
- 147Setting Up Dial Backup
  - Setting Up the DBM Physical Interface
    - 4-6
  - 148Setting Up Automatic Backup Configuration
    - 149The following prompt appears . . . If you select . . .
    - 1504-8
      - When the . . .
      - The following prompt appears . . . If you select . . .
  - 151Modifying ISDN Link Profiles
  - NOTES:
    - 4-10
  - 152Restricting Automatic Backup and Configuring Backup Timers
  - 153Configuring the DBM Interface to Send SNMP Traps
  - Assigning DLCIs to a Backup Group
    - 4-12
- 154PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
  - Changing Operating Mode
157Index
- Numerics
- A
- B
- C
  - IN-2
- 158D
- 159E
  - IN-4
- 160F
- G
- H
- I
- K
- L
- 161M
- N
  - IN-6
- 162O
- P
- 163Q
- R
- S
  - IN-8
- 164T
- U
- V

233 pages1.09 Mb

i
3Contents
- About This Guide
- 1 About the FrameSaver DSL Unit
- 2 User Interface and Basic Operation
- 3 Configuration Procedures
  - ii
- 44 Configuration Options
- 5 Security and Logins
  - iii
- 56 Operation and Maintenance
- 7 FTP Operation
  - iv
- 68 Troubleshooting
- 9 Setting Up OpenLane for FrameSaver Devices
  - v
- 710 Setting Up Network Health for FrameSaver Devices
- A Menu Hierarchy
- B SNMP MIBs and Traps, and RMON Alarm Defaults
  - vii
9About This Guide
- FTP Operation.
- Operation and Maintenance.
- Security and Logins.
- Configuration Options.
- Configuration Procedures.
- User Interface and Basic Operation.
- About the FrameSaver DSL Unit.
- Purpose and Intended Audience
- Document Organization
  - Section Description
  - 10 viii
  - Section Description
  - ix
- 11Product-Related Documents
  - Document Number Document Title
  - x
- 12Conventions Used
  - Convention Used When Used
  - 1-1
13About the FrameSaver DSL Unit 1
- System Overview
  - 1-2
- 14FrameSaver DSL Features and Benefits
  - Features
    - 15 1-3
    - 1-4
  - 16Benefits
    - About the FrameSaver DSL Unit
    - 17 1-5
      - The following diagram shows the FrameSaver DSL unit in a frame relay network.
    - 1-6
- 18FrameSaver DSL Feature Sets
  - Advanced SLV Features
  - Basic Features
  - 19 1-7
    - Advanced SLV Features
    - Basic Features
  - 1-8
  - 20Basic Features
    - 21 1-9
    - 1-10
  - 22Advanced SLV Features
    - OpenLane SLM System
    - 1-11
- 23OpenLane SLM System
  - 2-1
25User Interface and Basic Operation 2
- 2-2
- 26Logging On
  - 27 2-3
    - Saving Configuration Options
    - Configuration Procedures
  - 2-4
- 28Main Menu
  - Menu Hierarchy
    - User Interface and Basic Operation
  - 2-5
- 29Screen Work Areas
  - Screen Format Description
  - User Interface and Basic Operation
  - 2-6
- 30Navigating the Screens
  - Keyboard Keys
    - Use the following keyboard keys to navigate within the screen area: Press . . . To . . .
    - 2-7
  - 31Function Keys
    - Screen Work Areas
    - 2-8
  - 32Selecting from a Menu
  - Switching Between Screen Areas
    - Screen Work Areas
    - 2-9
  - 33Selecting a Field
  - Entering Information
    - 3-1
35Configuration Procedures 3
- 3-2
- 36Basic Configuration
  - 3-3
  - 37Configuration Option Areas
    - Configuration Option Tables
    - FrameSaver DSL 9783 Quick Reference
    - 3-4
  - 38Accessing and Displaying Configuration Options
    - 3-5
  - 39Changing Configuration Options
    - PVC Connections
    - User Interface and Basic Operation
    - 3-6
  - 40Saving Configuration Options
    - 4-1
41Configuration Options 4
- Overview
  - 42 4-2
  - 4-3
- 43Using the Easy Install Feature
  - Easy Install
  - 44 4-4
    - Table 4-1. Easy Install Configuration Options (1 of 2)
  - 45 4-5
    - Table 4-1. Easy Install Configuration Options (2 of 2)
      - Configuring the Ethernet Port
  - 4-6
- 46Setting Up So the Router Can Receive RIP
- Entering System Information and Setting the System Clock
  - 4-7
- 47Configuration Option Tables
- Configuring the Overall System
  - 4-8
  - 48Configuring Frame Relay and LMI for the System
    - System
    - Frame Relay and LMI
      - Table 4-2. System Frame Relay and LMI Options (1 of 2)
    - 49 4-9
      - Table 4-2. System Frame Relay and LMI Options (2 of 2)
    - 4-10
  - 50Configuring Service Level Verification Options
    - SLV options are selected from the System menu (see Table 4-3).
    - Service Level Verification
      - Table 4-3. Service Level Verification Options (1 of 2)
    - 51 4-11
      - Table 4-3. Service Level Verification Options (2 of 2)
    - 4-12
  - 52Configuring General System Options
    - General
    - 4-13
- 53Configuring the Physical Interfaces
  - Configuring the Network Interface
    - Physical
    - 4-14
  - 54Configuring the User Data Port
    - Data Ports
    - Physical
      - Table 4-6. Data Port Physical Interface Options (1 of 2)
    - 55 4-15
      - Table 4-6. Data Port Physical Interface Options (2 of 2)
    - 4-16
- 56Configuring Frame Relay for the Data Port
  - Data Ports
  - Frame Relay
    - Table 4-7. Data Port Frame Relay Options (1 of 2)
  - 57 4-17
    - Table 4-7. Data Port Frame Relay Options (2 of 2)
  - 4-18
- 58Configuring ATM for the Network Interface
  - 4-19
- 59Configuring Circuit and DLCI Records
  - Data Port
  - Configuration
  - Network
  - Configuration
  - Main Menu
  - Circuit Records Main Menu
  - DLCI Records
  - 60 4-20
    - Table 4-9. DLCI Record Options (2 of 3)
  - 61 4-21
    - Table 4-9. DLCI Record Options (3 of 3)
      - quality of service
  - 4-22
- 62Configuring PVC Connections
  - Configuring Management PVCs
  - PVC Connections
  - 63 4-23
    - Table 4-10. PVC Connection Options (2 of 2)
  - 4-24
- 64Setting Up Management and Communication Options
  - Configuring Node IP Information
    - Node IP
    - 65 4-25
      - Table 4-11. Node IP Options (1 of 3)
    - 66 4-26
      - Table 4-11. Node IP Options (2 of 3)
    - 67 4-27
      - Table 4-11. Node IP Options (3 of 3)
        ,
    - 4-28
  - 68Configuring Management PVCs
    - Configuring Node IP Information
    - Configuring Circuit and DLCI Records
    - Management PVCs
    - 69 4-29
      - Table 4-12. Management PVC Options (2 of 3)
        Interface
    - 70 4-30
      - Table 4-12. Management PVC Options (3 of 3)
        For nonmultiplexed DLCIs:
        For multiplexed DLCIs:
        Setting Up So the Router Can Receive RIP
    - 4-31
  - 71Configuring General SNMP Management
    - General SNMP Management
    - 72 4-32
    - 4-33
  - 73Configuring Telnet and/or FTP Session Support
    - Telnet and FTP Session
    - 74 4-34
      - Table 4-14. Telnet and FTP Session Options (2 of 3)
    - 75 4-35
      - Table 4-14. Telnet and FTP Session Options (3 of 3)
    - 4-36
  - 76Configuring SNMP NMS Security
    - SNMP NMS Security
    - 4-37
  - 77Configuring SNMP Traps
    - RMON Alarm Defaults
    - SNMP MIBs and Traps, and
    - SNMP Traps
    - 78 4-38
      - Table 4-16. SNMP Traps Options (2 of 3)
        linkname
    - 79 4-39
      - Table 4-16. SNMP Traps Options (3 of 3)
    - 4-40
  - 80Configuring the Ethernet Port
    - Ethernet Port
      - Table 4-17. Ethernet Port Options (1 of 2)
    - 81 4-41
      - Table 4-17. Ethernet Port Options (2 of 2)
    - 4-42
  - 82Configuring the Communication Port
    - Communication Port
      - Table 4-18. Communication Port Options (1 of 4)
    - 83 4-43
      - Table 4-18. Communication Port Options (2 of 4)
    - 84 4-44
      - Table 4-18. Communication Port Options (3 of 4)
    - 85 4-45
      - Table 4-18. Communication Port Options (4 of 4)
        Configuring Node IP Information
    - 4-46
  - 86Configuring the COM Port to Support an External Modem
    - Connectors, Cables, and Pin Assignments
    - External Modem (Com Port)
    - Standard EIA-232-D Crossover Cable
    - 5-1
87Security and Logins 5
- 5-2
- 88Limiting Access
  - Configuration Options,
  - Configuring the Communication Port
- Controlling Asynchronous Terminal Access
  - 89 5-3
    - Communication Port
    - Resetting the Unit and Restoring Communication
  - 5-4
- 90Controlling External COM Port Device Access
- Controlling Telnet or FTP Access
  - 5-5
  - 91Limiting Telnet Access
    - Configuring Telnet and/or FTP Session Support
    - Limiting Telnet or FTP Access Over the TS Management Link
    - Telnet and FTP Sessions
    - 5-6
  - 92Limiting FTP Access
    - Configuring Telnet and/or FTP Session Support
    - Telnet and FTP Sessions
    - 5-7
  - 93Limiting Telnet or FTP Access Over the TS Management Link
    - 5-8
- 94Controlling SNMP Access
  - Disabling SNMP Access
    - 5-9
  - 95Assigning SNMP Community Names and Access Levels
    - 5-10
  - 96Limiting SNMP Access Through IP Addresses
    - Configuring General SNMP Management
    - General SNMP Management
    - Management and Communication
    - Configuration
    - Main Menu
    - SNMP Management: Enable
    - SNMP NMS Security
    - 5-11
      - Configuration Options,
      - Control
      - Configuring SNMP NMS Security
- 97Creating a Login
  - Administer Logins
  - 5-12
- 98Modifying a Login
- Deleting a Login
  - 6-1
99Operation and Maintenance 6
- 6-2
- 100Displaying System Information
  - nn.nn.nn
  - nnnn-nnx
  - Identity
    - View this field . . . To find the . . .
  - 6-3
- 101Viewing LEDs and Control Leads
  - DSL
  - FrameSaver
  - SLV
  - FrameSaver
    - Display LEDs and Control Leads
  - 6-4
  - 102LED Descriptions
    - 103 6-5
    - 6-6
  - 104Control Lead Descriptions
    - 6-7
- 105Device Messages
  - (Seen at an FTP terminal.)
  - 106 6-8
    - Table 6-5. Device Messages (2 of 5)
      - FTP Operation
      - Changing Software
      - FTP Operation
      - Changing Software
  - 107 6-9
    - Table 6-5. Device Messages (3 of 5)
  - 108 6-10
    - Table 6-5. Device Messages (4 of 5)
      - Upgrading System Software
      - FTP Operation
  - 109 6-11
    - Table 6-5. Device Messages (5 of 5)
  - 6-12
- 110Status Information
  - 6-13
- 111System and Test Status Messages
  - Status
  - System and Test Status
  - Self-Test Results Messages
  - Last System Reset Date and Time
  - Health and Status Messages
  - Test Status Messages
  - Self-Test Results Messages
  - Last System Reset Date and Time
    - 6-14
  - 112Health and Status Messages
    - nnnn
    - nnnn
    - Change Operating Mode)
    - Control
    - Main Menu
    - 113 6-15
      - Table 6-7. Health and Status Messages (2 of 3)
        nnnn
        atm link
    - 114 6-16
      - Table 6-7. Health and Status Messages (3 of 3)
        nnnn
        Time Slot Assignment
        Configuration
        Main Menu
        Frame Relay Network Assignments)
    - 6-17
  - 115Test Status Messages
    - nnnn
    - frame_relay_link
    - [Interface]
    - Pttn
    - frame_relay_link
    - Pttn
    - 116 6-18
      - Table 6-8. Test Status Messages (2 of 2)
    - 6-19
  - 117PVC Connection Status
    - DLCI
    - Name
    - PVC connection statuses are selected from the Status menu.
    - PVC Connection Status
      - or
      - VPI,VCI
    - 118 6-20
      - Table 6-9. PVC Connection Status (2 of 2) Field What It IndicatesStatus
    - 6-21
- 119Network Interface Status
  - Network Interface Status can be viewed from the Status menu.
  - Network Interface Status
    - Network Interface Status Screen Example
    - Table 6-10. Network Interface Status Field Status What It Indicates
  - 6-22
- 120IP Routing Table
  - IP Routing Table
  - 121 6-23
    - Table 6-11. IP Routing Table Values Column What It Indicates
      - name
  - 6-24
- 122Performance Statistics
  - 6-25
  - 123Clearing Performance Statistics
    - 6-26
  - 124Service Level Verification Performance Statistics
    - yyy
    - Service Level Verification
      - xx,yyy,
    - 125 6-27
      - Table 6-12. Service Level Verification Performance Statistics (2 of 2)
    - 6-28
  - 126DLCI Performance Statistics
    - DLCI
    - 127 6-29
      - Table 6-13. DLCI Performance Statistics (2 of 2)
    - 6-30
  - 128Frame Relay Performance Statistics
    - Frame Relay
    - 129 6-31
      - Table 6-14. Frame Relay Performance Statistics (2 of 2)
        (contd)
    - 6-32
  - 130ATM Performance Statistics
    - ATM
    - 131 6-33
    - 6-34
  - 132Ethernet Performance Statistics
    - The following statistics appear when Ethernet is selected from the Performance Statistics menu.
    - Ethernet
    - 6-35
- 133Trap Event Log
  - Standards Compliance for SNMP Traps
  - Status
  - Trap Event Log
  - SNMP MIBs and Traps, and RMON Alarm Defaults
  - 7-1
135FTP Operation 7
- 7-2
- 136FTP File Transfers
  - Transferring Collected Data
  - from
  - to
  - to/from
    - FTP Operation
  - 137 7-3
    - Security and Logins
    - Creating a Login
      - in Chapter 5,
  - 7-4
  - 138Upgrading System Software
    - Changing Software
    - xxxxxx
    - 7-5
  - 139Determining Whether a Download Is Completed
  - Changing Software
    - 7-6
  - 140Transferring Collected Data
    - Configuration Options)
  - NOTES:
    - Viewing Captured Packets from the Menu-Driven User Interface
    - 8-1
141Troubleshooting 8
- 8-2
  - DTE Loopback
  - IP Ping Test
  - Lamp Test
- 142Problem Indicators
  - 8-3
- 143Resetting the Unit and Restoring Communication
  - Resetting the Unit from the Control Menu
  - Resetting the Unit By Cycling the Power
    - 8-4
  - 144Restoring Communication with an Improperly Configured Unit
    - 8-5
- 145Troubleshooting Management Link Feature
  - FTP Operation
  - Transferring Collected Data
  - Control
  - Viewing Captured Packets from the Menu-Driven User Interface
  - Configuring Node IP Information
- LMI Packet Capture Utility Feature
  - LMI Packet Capture Utility
  - 8-6
  - 146Viewing Captured Packets from the Menu-Driven User Interface
    - LMI Packet Capture Utility
    - Display LMI Trace Log
    - 8-7
- 147Alarms
  - Status
  - System and Test Status
    - Table 8-1. Alarm Conditions (1 of 4) Alarm Condition What It Indicates What To Do
  - 148 8-8
    - Table 8-1. Alarm Conditions (2 of 4)
  - 149 8-9
    - Table 8-1. Alarm Conditions (3 of 4)
      - nnnn
      - atm link
  - 150 8-10
    - Table 8-1. Alarm Conditions (4 of 4)
  - 8-11
- 151Trap Event Log
  - Operation and Maintenance
  - Trap Event Log
- Troubleshooting Tables
  - Device Problems
    - 152 8-12
      - Table 8-2. Device Problems (2 of 2) Symptom SolutionsPossible Cause
        Restoring Communication with an Improperly Configured Unit
        xxxxxxxx
    - 8-13
  - 153ATM Problems
    - 8-14
  - 154Frame Relay PVC Problems
    - Table 8-4. Frame Relay PVC Problems Symptom Possible Cause Solutions
    - 8-15
- 155Tests Available
  - 8-16
  - Test Timeout Feature
    - Aborting All Tests
    - Configuration Options
    - Configuring General System Options
- 156Starting and Stopping a Test
  - 8-17
  - 157Aborting All Tests
    - Starting and Stopping a Test
    - 8-18
- 158PVC Tests
  - 8-19
  - 159PVC Loopback
    - Network PVC Tests
    - Data Port PVC Tests
  - Send Pattern
    - [Network PVC Tests/Data Port PVC Tests]
    - 8-20
  - 160Monitor Pattern
    - [Network PVC Tests/Data Port PVC Tests]
  - Connectivity
    - Network PVC Tests
    - 8-21
- 161DTE Loopback
  - Data Port Physical Tests
  - CAUTION:
    - 8-22
- 162IP Ping Test
  - nn
  - "
    - IP Ping
    - 8-23
  - 163"
    - 8-24
- 164Lamp Test
  - 9-1
165Setting Up OpenLane for FrameSaver Devices 9
- OpenLane Support of FrameSaver Devices
- Setting Up the OpenLane SLM System
- Setting Up FrameSaver and SLV Support
- OpenLane Support of FrameSaver Devices
  - 9-2
- 166Setting Up the OpenLane SLM System
  - About This Guide
  - Product-Related Documents
  - OpenLane 5.x Service Level Management for UNIX Quick Start Installation Instructions
  - OpenLane 5.x Service Level Management for Windows NT Quick Start Installation Instructions
  - 9-3
- 167Setting Up FrameSaver and SLV Support
  - 10-1
169Setting Up Network Health for FrameSaver Devices 10
- 10-2
  - Network Health Installation Guide
  - Network Health Traffic Accountant Reports Guide
- 170Installation and Setup of Network Health
  - 10-3
- 171Discovering FrameSaver Elements
  - Discovering Elements
  - elements
  - 10-4
- 172Configuring the Discovered Elements
  - Discovering Elements
  - 10-5
- 173Grouping Elements for Reports
  - Managing Groups and Group Lists
  - 10-6
- 174Generating Reports for a Group
  - Health Reports Guide
  - Running Reports from the Console
  - About Service Level Reports
  - About At-a-Glance Reports
    - 10-7
  - About Trend Reports
    - exception points
  - Printed Reports
- 175Reports Applicable to FrameSaver SLV Devices
  - 176 10-8
  - 178 10-10
    - Menu Hierarchy
  - 180 A-2
    - Menu Hierarchy Frame Relay Mode
      - Status
        Identity
        Network Interface Status
        PVC Connection Status
      - Status
        Test Configuration Control Easy Install
        Performance Statistics
        System and Test Status
        Status
      - Test
        Configuration Control Easy Install
        Physical Tests
        Test
        PVC Tests
        IP Routing Table
        Trap Event Log
        Load Configuration from:
        Configuration Edit/Display
        Network and Data Ports
        Status Test
      - Configuration
        Control Easy Install
        System
        PVC Connection Table
        Management and Communication Options
      - Menu Hierarchy
        9783-A2-GB20-00 July 2000
  - 181 A-3
    - Control
    - Easy Install
      - System Information
      - Control
      - Administer Logins
      - Select Software Release
      - LMI Packet Capture Utility
      - Easy Install
  - B-1
183SNMP MIBs and Traps, and RMON Alarm Defaults B
- B-2
- 184MIB Support
- Downloading MIBs and SNMP Traps
  - B-3
- 185System Group (mib-2)
  - FrameSaver Units sysDescr (system 1)
  - FrameSaver Units sysObjectID (system 2)
    - B-4
- 186Interfaces Group (mib-2)
  - Paradyne Indexes to the Interface Table (ifTable)
    - B-5
  - 187NetScout Indexes to the Interface Table (ifTable)
    - DLCI number
    - interface number
    - hhhh-hhh
    - For the DTE side:
    - For the DCE side:
    - hhhh-hhh
    - B-6
- 188Standards Compliance for SNMP Traps
  - Examples:
  - B-7
  - 189Trap: warmStart
  - Trap: authenticationFailure
    - B-8
  - 190Traps: linkUp and linkDown
    - 191 B-9
      - Table B-6. linkUp and linkDown Variable-Bindings (1 of 3) Interface Variable-Bindings Possible Cause
        Sample strings:
    - 192 B-10
      - Table B-6. linkUp and linkDown Variable-Bindings (2 of 3) Interface Possible CauseVariable-Bindings
        (contd)
    - 193 B-11
      - Table B-6. linkUp and linkDown Variable-Bindings (3 of 3) Interface Possible CauseVariable-Bindings
    - B-12
  - 194Traps: enterprise-Specific
    - 195 B-13
      - s
    - 196 B-14
    - B-15
  - 197Traps: RMON-Specific
    - RMON Alarm and Event Defaults
      - Two traps are defined to support the Alarm and Events Groups of RMON. See
    - B-16
- 198RMON Alarm and Event Defaults
  - Traps: RMON-Specific
  - Standards Compliance for SNMP Traps
  - Physical Interface Alarm Defaults
  - Frame Relay Link Alarm Defaults
  - DLCI Alarm Defaults Paradyne Area
  - DLCI Alarm Defaults NetScout Area
  - B-17
  - 199Physical Interface Alarm Defaults
    - B-18
  - 200Frame Relay Link Alarm Defaults
    - 201 B-19
      - Table B-10. Frame Relay Link Alarm Defaults (2 of 2) Item
      - Interval MIB/Tag/OID
      - Event
      - Sample Type
    - B-20
  - 202DLCI Alarm Defaults Paradyne Area
    - 203 B-21
      - Table B-11. DLCI Alarm Defaults Paradyne Area (2 of 3) Item
      - Interval MIB/Tag/OID
      - Event
      - Sample Type
    - 204 B-22
    - B-23
- 205Object ID Cross-References (Numeric Order)
  - 206 B-24
    - Table B-14. History OID Cross-Reference (1 of 5) Object ID (OID)1Item MIB/Tag
  - 207 B-25
    - Table B-14. History OID Cross-Reference (2 of 5)
  - 208 B-26
    - Table B-14. History OID Cross-Reference (3 of 5)
  - 209 B-27
    - Table B-14. History OID Cross-Reference (4 of 5)
  - 210 B-28
    - Table B-14. History OID Cross-Reference (5 of 5)
    - See Table B-15 for an RMON alarm OID cross-reference.
  - 211 B-29
    - Table B-15. Alarm OID Cross-Reference (1 of 2) Object ID (OID) Item MIB/Tag
  - 212 B-30
    - Table B-15. Alarm OID Cross-Reference (2 of 2) Object ID (OID) MIB/TagItem
  - C-1
213Connectors, Cables, and Pin Assignments C
- Rear Panel
  - Connectors, Cables, and Pin Assignments
  - C-2
- 214DSL Network Interface Cable
  - Pin #8
  - Pin #1
  - Figure C-1. DSL Network Interface Cable with RJ48C Connector )
  - 8-Pin Plug
  - C-3
- 215COM Port Connector
  - Connectors, Cables, and Pin Assignments
  - C-4
  - 216Standard EIA-232-D Crossover Cable
    - 217 C-5
    - C-6
- 218Data Port Connector
  - Standard V.35 Straight-through Cable
    - C-7
- 219Ethernet Port Connector
  - D-1
221Technical Specifications D
- Table D-1. FrameSaver DSL Technical Specifications (1 of 2) Specification Criteria
- Technical Specifications
- 222 D-2
  - Table D-1. FrameSaver DSL Technical Specifications (2 of 2) Specification Criteria
- E-1
223Equipment List E
- Equipment
  - See page E-2 for cables you can order. Description Model/Feature Number
  - Equipment List
  - E-2
    - Description Model/Feature Number
- 224Cables
  - This table lists cables you can order. Description Part Number Feature Number
  - IN-1
225Index
- Numbers
- A
- B
- C
  - IN-2
- 226D
  - IN-3
- 227E
- F
- G
  - IN-4
- 228H
- I
- K
- L
  - IN-5
- 229M
- N
  - IN-6
- 230O
- P
- Q
- R
  - IN-7
- 231S
  - IN-8
- 232T
  - IN-9
- 233U
- V
- W

Also you can find more Paradyne manuals or manuals for other Computer Equipment.

Paradyne 9783 Installation Instructions

28 pages297.96 Kb

Also you can find more Paradyne manuals or manuals for other Computer Equipment.