Warnings
English
WA R N I N G | This symbol on the instrument indicates that the user should refer to the man- | |
ual for operating instructions. | ||
| ||
|
|
WA R N I N G | Any operation requiring access to the inside of the equipment, could result in | |
injury. To avoid potentially dangerous shock, disconnect from power supply | ||
| ||
| before opening the equipment. | |
|
|
WA R N I N G | For continued protection against fire hazard replace fuse with same type and | |
rating. | ||
| ||
|
|
WA R N I N G | This symbol indicates that to comply with European Union Directive | |
2002/96/EC for waste electrical and electronic equipment (WEEE), the Ana- | ||
| ||
| lyzer should be disposed of separately from standard waste. | |
|
|
WA R N I N G | This is a safety Class I product. It must be wired to a mains supply with a protective | |
earthing ground incorporated into the power cord. Any interruption of the protective | ||
| ||
| conductor, inside or outside the equipment, is likely to make the instrument dangerous. | |
| Intentional interruption is prohibited. | |
|
|
WA R N I N G | If this instrument is used in a manner not specified by Agilent, the protection provided by | |
the instrument may be impaired. | ||
|
WA R N I N G | High voltage is present in the instrument when the power cord is connected, even if the | |
main power switch is in the standby mode. To avoid potentially dangerous shock, discon- | ||
| ||
| nect the power cord before removing the side panels. | |
|
|
Operation and Maintenance Manual | 3 |
