Agilent Technologies G6600-90006 manual Dual Plasma Controller Controls

The baseline signal from the SCD and NCD can be adjusted from 0 to ±1% of the full scale recorder output using the offset control. (e.g., +10 mV to -10 mV for a 1 V full scale setting). This control can be used to offset the background signal.

Dual Plasma Controller Controls

The Agilent Dual Plasma Controller provides easy access to basic settings.

Figure 22 Dual Plasma Controller Front Panel

Oxidizer and	Allow you to adjust the oxidizer and hydrogen flow
Hydrogen Control	rate.
Knobs
Temperature Control	Allows you to adjust the Burner temperature.
Knob
Selector Control Knob	Changes the display to show the current value or
	set point for each setting (temperature in °C,
	pressure in Torr, oxidizer in sccm, or hydrogen in
	sccm).

66 Operation and Maintenance Manual