Agilent Technologies G6600-90006 manual Overview

Overview

Installation and start-up of the Agilent 355 SCD or 255 NCD by a qualified Agilent Service technician is recommended. If you choose to install the detector yourself, carefully read all of this chapter prior to installation of the instrument.

Although every reasonable safeguard against shipping damage has been taken, product damage may still occur due to excessive mishandling. If obvious damage has occurred during shipment, contact Agilent. Shipping materials for the 355 SCD or 255 NCD should be saved. If the instrument must be returned to the factory, it must be packed in the original carton to reduce the chance for damage during shipment. Replacement shipping containers can be purchased from Agilent.

WA R N I N G	Substituting parts or performing unauthorized modification to the instrument may result
	in a safety hazard.

WA R N I N G	Hydrogen is a flammable gas. Perform periodic leak tests to verify there are no leaks in
	the hydrogen lines and connections. Before making any connections, shut off the hydro-
	gen supply. Connect or cap all fittings at all times when using hydrogen.

40 Operation and Maintenance Manual