English
| Basic Operation |
| Selecting the Monitor |
1 | Opening Angle |
| The monitor opening angle can be set in 2 |
| positions. |
1 | Press and hold the OPEN/CLOSE button for at |
least 2 seconds while the monitor is being |
raised. Each press changes the monitor angle back or forth.
| 1 |
| Adjusting the Monitor |
| Viewing Angle |
| Adjust the monitor's angle for better visibility. |
1 | Press the and buttons to adjust the |
monitor's angle so the screen will be in the best |
viewing position. Each press of the buttons produces a beep and changes the screen angle between 80 and 104 degrees.
Notes: ∙ If the monitor touches an obstacle while the angle is being adjusted the unit will stop the screen immediately. Should this happen, remove the
obstacle and press the 
or 
button again.
∙ The screen colour will vary when viewed at certain angles. Adjust the screen angle for the best viewing position.
∙ If the voltage of the vehicle's battery power is low, the screen may blink when the screen angle is changed. This is normal and not a malfunction.
28
