Brother 7550MC Remote Retrieval Message Center Mode Settings, Using the Remote Access Code

MFC 4550/6550MC/7550MC

OP-US-5.0

REMOTE RETRIEVAL MESSAGE CENTER MODE SETTINGS

6.Enter a three digit number 000 to 999. The last digit, an asterisk, can not be changed.

Example:160*.

7.Waitfortwoseconds.

ACCESS CODE:159*

ACCESS CODE:160*

4.REMOTE ACCESS

8. PressStoptoexit.

Using the Remote Access Code

1.Pick up the handset of a remote touch tone phone or fax machine.

2.Dial your MFC’s number.

3.When your MFC answers with a beep, immediately press your Remote Access Code(159*).

If your MFC is in Manual mode, you can access the Message Center by waiting for 20 rings and then pressing the code within 30 seconds.

4.TheMFC willtellyou the kindof message(s)it hasreceived:

One long beep:	Received FAX message(s).
Two long beeps:	Received VOICE message(s).
Threelongbeeps:	Received both FAX and VOICE messages.
(Nolongbeeps:	No message(s)have been received.)

5.As soon as you hear two (2) short beeps, press a Control Command.

EachtimeyourMFCcompletesaninstruction,itgivestwo(2)shortbeepstelling you to enter the next command; if you wait longer than 30 seconds to enter the command,yourmachinewilldisconnecttheline.Ifyouperformawrongoperation, youwillhearthree(3)shortbeeps.

6.When you are ready to exit remote control mode, press 90 to reset your machine.

FAX Options

9-25