Brother 6550MC, 7550MC warranty 10-10, Paper Tray

MFC 4550/6550MC/7550MC

OP-US-5.0

USING THE MFC AS A PRINTER

Helpful Hints 1. You may select manual paper feed, paper size, and orientation in your application software. If your application software does not allow these settings, you should set them using the RPC program supplied with your MFC. (Only for MFC 6550MC/7550MC)

2.If you do not select manual paper feed and insert a page in the manual feed slot, the MFC will load the first page from the manual feedslotandsubsequentpagesfromthemultipurposesheetfeeder.

3.If your application software does not support your custom paper size, select the next paper size. Then adjust the print area by changingtherightandleftmarginsinyourapplicationsoftware.

4.When you want to stop or clear the manual feed, press Shift and Test/Reset, or you can also stop it with a PC command.

5.When you use manual feed slot, it is best to first press Print Priority. This allows you to print PC data without interruption from incoming faxes. Incoming faxes will be stored in the MFC's memory. To continue printing PC data, press FF/Cont after each pagehasprinted.

6.Ifbidirectionalcommunicationisnotoperationalbetweentheprinter and the computer, such as when the MFC is shared on a network, the dialog box to load the next page will not appear. When your MFC is attached to a network, we do not recommend manual feeding.

FOR YOUR INFORMATION

Paper Tray

The MFC ejects paper with printed surfaces face down into the paper tray at the front of the MFC.

Whenyouusetransparencies,removeeachsheetimmediatelyafterprinting, topreventapaper jamorcurledsheets.

10-10