MESSAGE CENTER

12- 12

Remote Commands Operation Details
96 Retrieve Fax
1 Memory Status List
2 Retrieve all Faxes
3 Erase Fax from Memory
97 Check Receiving Status
1 FAX
2 VOICE
98 Change Answer Mode
1 MSG CTR
2 FAX/TEL
3 FAX
90 Exit
Enter the fax number where the report or
stored fax messages will be received. (See
page 12-13.)
If you hear one long beep, you can erase the
fax message from the memory.
You can check whether your MFC has
received any FAX or VOICE messages. If
yes, you will hear one long beep. If no, you
will hear three short beeps.
If you hear one long beep, you can change
the answer mode. If you hear three short
beeps, you cannot change it. (For example:
When there is no MSG CTR OGM and you
tried to change to MSG CTR mode.)
After a long beep, you can exit remote
retrieval.