See
Setting
Ring Delay
p.
To erase messages all at once
1 Press Erase .
ERASE ALL VOICE?
SELECT <- -> & SET
2 Press 
or 
to select erasing all voice messages (VOICE), all document messages (FAX), or all
3 Press 1 to erase — | 2 to cancel. |
Setting Maximum Time for Incoming Messages
Your MFC comes set to receive voice messages up to 30 seconds long. You can change this setting to any length from 20 seconds to 60 seconds, in
1Press Function , 1 , 7 , 4 .
MESSAGE | 30 SEC? |
SELECT | & SET |
2 Press 
or 
to select the maximum time for incoming messages and press Set .
3 Press Stop to exit.
Setting Toll Saver
When you set the toll saver feature, the MFC answers after four rings if you don’t have messages, and after two rings if you do have messages. This way, when you call the MFC, if it rings three times, you know you have no messages, and can hang up, avoiding a toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be OFF for the MFC to use the Ring Delay setting.
1 | Press Function , | 1 , 2 , 1 . |
2 | Press or | to select TOLL SAVER (or RING DELAY) and |
| press Set . |
|
3 Press 
or 
to select ON and press Set . 4 Press Stop to exit.
Message Center
M E S S A G E C E N T E R |
|
|
|
