Brother MFC 7050C owner manual Redial, Tone/Pulse, Searching Telephone Index

See

Storing One

Touch Dial

Numbers

p. 8-1

and

Storing Speed

Dial Numbers

p. 8-3

Redial

If you dialed using Hook and got a busy signal, press Hook again to clear the line. You can dial again easily by pressing Redial/Pause .

Tone/Pulse

If you have pulse dialing service, but need to send tone signals (for telephone banking, for example), follow the directions below. If you have touch tone service, you do not need this feature to send tone signals.

1Lift the handset.

2Press . Digits dialed after this send tone signals.

3When you hang up, the MFC returns to pulse dialing service.

Searching Telephone Index

You can search for names you have stored in One Touch and Speed Dial memories. Names are stored alphabetically.

1	Press Tel-index , then enter the first letter of the name you’re
	looking for.
2	Press	or	to search the memory.
3	When the screen displays the name you want to call, press
	Hook , (or for a voice call, pick up the handset).
4	Press Start	to begin dialing.
5	If you pressed Hook to dial the call, pick up the handset when
	the other party answers. (The speaker works only one way; the
	other party won’t be able to hear you unless you pick up the
	handset.)
6	When the call is over, hang up.

9-4 T E L E P H O N E O P E R A T I O N