Brother MFC 7050C Real Time Transmission, Checking Job Status, Realtime TXOFF? Select & SET

Real Time Transmission

When Memory is full, the MFC cannot continue scanning documents into memory before sending. However, you can turn on REALTIME TX. Then place the documents in the feeder and enter the fax number. As soon as the phone line is free, the MFC starts dialing and sending the fax.

1

2

3

Place the document in the feeder.

Press Function , 1 , 3 , 7 .

To change the default setting, press or to select ON (or OFF) and press Set . Go to Step 5— OR—For the next fax

transmission only, press or to select NEXT FAX ONLY and press Set .

REALTIME TX:OFF?

SELECT & SET

4For the next fax only, press or to select ON (or OFF) and press Set .

ACCEPTED

OTHER SETTINGS?

1.YES 2.NO

5 Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu— OR—Press 2 if you are finished choosing settings and go to Step 6.

6 Enter the fax number and press Start .

Checking Job Status

You can check which jobs are in memory waiting to be sent. Press Function , 1 , 4 to check it.

7-4 S E T U P S E N D