| Setting Logon Options |
|
|
Field | Description |
|
|
Application ID | The OMEGAMON II classic interface VTAM mode application |
| identifier. |
|
|
DB2 subsystem | The DB2 subsystem ID that you want to monitor. |
|
|
Logical rows | The number of logical rows |
|
|
Migrate Profile from | Enter Yes if you want to migrate a classic interface user profile to a |
OMEGAMON | CUA subsystem profile. Use this feature only to provide a set of |
| values to use as a starting point for customizing the CUA subsystem |
| profile. |
| When you migrate classic threshold values, they become CUA critical |
| values. |
| If a CUA exception is set to trip when it exceeds its threshold, then |
| the warning threshold is set to 80% of the critical threshold. If a CUA |
| exception is set to trip when it falls below its threshold, then the |
| warning threshold is set to 125% of the critical threshold. |
| For exceptions that are not associated with threshold values, the CUA |
| critical value is set to on, and the warning value is set to off. If the |
| classic STATE= value is ON, the CUA monitor value is YES. If the |
| value for STATE= is OFF, the monitor value is NO. |
|
|
OMEGAMON Profile to | The suffix of the profile you want to migrate from the classic |
Migrate | OMEGAMON II system. |
|
|
User Data | Additional classic interface options, such as USER=cc. |
| Note: During normal operations, this field should be left blank. |
|
|
Getting Started | 23 |