![](/images/new-backgrounds/1263700/263700185x1.webp)
Using the OMEGAMON II for DB2 Callable Interface
Using the OMEGAMON II for DB2 Callable Interface
The callable interface feature of OMEGAMON II for DB2 lets you make direct calls to !DB/EXPLAIN without first having to access TSO.
Before using this feature, you should do the following:
1.Customize the Classic started task.
2.Set up !DB/EXPLAIN.
3.Set up the CUA options.
4.Set up the OMEGAMON II for DB2/EXPLAIN options.
Customizing the Classic started task to implement the OMEGAMON II for DB2 interface
Use the following procedure to customize the Classic started task.
Note: You may have already completed this procedure during the installation of OMEGAMON II for DB2.
Step | Action |
1From the Configure OMEGAMON II for DB2 for Runtime Environment Default menu, select option 2, Realtime Monitor Interfaces.
-----CONFIGURE OMEGAMON II FOR DB2 FOR RUNTIME ENVIRONMENT DEFAULT
OPTION ===>
Select the following options to configure OMEGAMON II for DB2.
You may type ALL to update the entire configuration or you may update specific sets of values by making selections from the list below.
1DB2 Subsystem Information
2Realtime Monitor Interfaces
3Event Collection Manager and ATF configuration
4Historical Components
F1=Help F3=End
Result: The system displays the Started Task and VTAM Information Panel.
Using OMEGAMON II for DB2 with !DB/EXPLAIN | 93 |