2-72
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter2 Administrative Commands
system ib-counter-reset
system ib-counter-reset
To disable the regular resetting of IB port counters on your server switch, enter the system
ib-counter-reset command in Global Configuration mode. To reenable the regular resetting of IB port
counters on your server switch, use the no form of this command.
system ib-counter-reset
no system ib-counter-reset'
Syntax Description This command has no arguments or keywords.
Defaults Counter resetting is enabled.
Command Modes Global Configuration mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted and general read-write user.
'Use the system ib-counter-reset command to enable or disable the regular resetting of IB port
counters. This is a global, chassis-wide setting that allows you to stop all IB port agents from resetting
the IB port counters.
Examples 'The following example disables the regular resetting of IB por t c oun ters :
SFS-7000P(config)# no system ib-counter-reset