6-165
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Commands
show interface gateway
Examples The following example displays the attributes of the IP address of the gateway port:
:
SFS-7000P# show interface gateway 5 ip all
======================================================================
IP Address Table
======================================================================
port address mask bcast-addr reasm type status
format max-size
----------------------------------------------------------------------------
4/0 10.3.22.0 255.255.255.0 1 0 primary active
SFS-7000P#
The following example uses the
show interface gateway
command to display general gateway
properties. The information fields displayed depend upon the interface type. The examp le below displays
the properties of a Fibre Channel gateway port. To see the properties of an Ethernet po rt, see t h e
description of “show interface ethernet” section on page6-148.
SFS-7000P# show interface gateway 4
===============================================================
===============================================================
Gateway Information
===============================================================
gateway : 4
name : 4/0
type : fc-gateway
desc : 4/0 (320)
last-change : none
mtu : 0
admin-status : up
oper-status : up
SFS-7000P#
srp-connections Cumulative number of I/O connections that the gateway has used.
fcp-cmds-outstanding Cumulative number of unresolved FCP commands on the gateway.
fcp-cmds-completed Cumulative number of FCP commands that the gateway executed.
fcp-errors Cumulative number of FCP errors that the gateway encountered.
fcp-initiated-ios Cumulative number of I/O replies that FC devices sent through the gateway
in response to SRP requests from initiators.
fcp-bytes-read Cumulative number of Fibre Channel Protocol bytes that the card has read
since it came up.
fcp-bytes-written Cumulative number of Fibre Channel Protocol bytes that the card has written
since it came up.
Table6-68 statistics Keyword Output Field Descriptions (continued)
Field Description