6-91
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Commands
show ib pm port monitor
show ib pm port monitor
To show the performance monitoring user-configured monitored ports, or the cumulative port counters,
or the cumulative port counters for ports that have exceeded thresholds, enter the show ib pm port
monitor command in User Execute mode or Privileged Execute mode.
show ib pm por t monitor
[
counter
|
error-counter
]
subnet-prefix
prefix [
node-guid
guid
[port-num port}]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output:
counter (Optional) Show the counters accumulated since monitoring was enabled.
error-counter (Optional) Show the counters accumulated for ports that have exceeded
thresholds.
subnet-prefix Specifies the subnet prefix of the port monitor.
prefix Subnet prefix of the port monitor.
node-guid (Optional) Specifies the GUID of the device with the ports that you want to
view.
guid (Optional) GUID of the device with the ports that you want to view.
port-num (Optional) Specifies the port number of the port that you want to view.
port (Optional) Port number of the port that you want to view.
subnet-prefix Subnet to which the connection belongs
node-guid GUID of the node belonging to the connection
port-num Port number on the node belonging to the connection.
chassis-guid GUID of the chassis to which the port belongs (if available)
slot-num Slot number on the chassis to which the port belongs (if available)
ext-port-num Port number on the chassis slot to which the port belongs (if available)
data-is-valid If the value is false, re-run the command to obtain valid data