2-24
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter2 Administrative Commands
configure terminal
configure terminal
To enter Global Configuration mode, enter the configure terminal command in Privileged Exec mode.
configure terminal
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted and general read-write user.
Use the
configure terminal
command to enter Global Configuration mode. From this mode, you can
configure gateway and switch cards, subnet management, IP addressing, and various aspects of your
Server Switch.
Examples The following example enters Global Configuration mode:
SFS-7000P# configure terminal
SFS-7000P(config)#
Related Commands arp ethernet
authentication
boot-config
bridge-group
card
show diagnostic
exit
fc srp initiator
fc srp initiator-wwpn
fc srp it
fc srp itl
fc srp lu
fc srp target
fc srp-global gateway-portmask-policy restricted
fc srp-global itl
fc srp-global lun-policy restricted