Cisco Systems 7000 show ib sm configuration

6-96
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Comma nds
show ib sm configuration
show ib sm configuration
To display information about the subnet managers on your InfiniBand fabric, enter the
show ib sm configuration command in User Exec mode or Privileged Exec mode.
show ib sm configuration { subnet-prefix prefix | all } [ summary ]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Command Output:
Table 6 -34 describes the fields in the show ib sm configuration command output.
subnet-prefix Specifies the subnet prefix of subnet manager that you want to view.
prefix Subnet prefix of the subnet manager that you want to view.
all The current CLI can only report the local subnet manager configuration data.
Therefore, the subnet-prefix value of 'all' is just an alias to the s ubnet value
of the subnet manager local to the CLI.
summary (Optional) Displays an abridged form of the command output. The abridged
information includes the subnet prefix, GUID, priority, and subnet manager
key of the subnet managers.
Table6-34 show ib sm configuration Command Field Descriptions
Field Description
subnet-prefix 64-bit value used that identifies the InfiniBand subnet. This is a unique subnet
identifier joins with the GUID to form the global identifier (GID) of the port.
Each GIDs within a subnet has the same subnet prefix.
guid GUID of this subnet manager.
priority User-assigned priority for this subnet manager. You must enter an integer
between 0 and 15. The value defaults to 10.
Note When the chassis boots, the subnet manager priority defaults to 1 0.
When you add the subnet manager manually, the priority defaults to 10.