6-81
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Commands
show ib pm config
show ib pm config
To view the performance monitoring configuration on an InfiniBand subnet, enter the
show ib pm
config
command in User Execute mode or Privileged Execute mode.
show ib pm config
subnet-prefix
prefix
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Table 6 -32 describes the fields in the show ib pm config command outp ut.
Examples The following example displays the output of the sh ow ib pm config co mmand :
SFS-120# show ib pm config subnet-prefix fe:80:00:00:00:00:00:00
================================================================================
IB PM Configuration
================================================================================
subnet-prefix : fe:80:00:00:00:00:00:00
state : enable
polling-period : 10
start-delay : 60
subnet-prefix Specifies the subnet prefix of the InfiniBand subnet for which you want to
view performance monitoring.
prefix Subnet prefix of the InfiniBand subnet for which you want to view
performance monitoring
Table6-32 show ib pm config Command Output Descriptions
Field Description
subnet-prefix Subnet prefix of the InfiniBand subnet with the performance monitoring
configuration you are viewing.
state State of performance monitoring (enabled or disabled).
polling period Interval at which the feature polls port s and c onn ect ions (in se conds) .
start-delay Time that elapses before performance managing executes (in seconds).