3-20
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter3 Fibre Channel Commands
fc srp-global itl
Table 3 -3 provides usage guidelines for this command.
Table3-3 Usage Guidelines for fc srp-global itl Command Arguments
Policy Description
sequential (Optional) Configures SRP global defaults for LUs of
sequential access devices. Without this keyword, the
configuration will be for the global defaults for LUs of
random access devices.
dynamic-gateway-port-failover SRP global defaults for LUs of random/sequential access
devices.
Default for random devices: false
Default for sequential devices: true
This value is applied to LU entries as their default setting
at entry creation time. You can overwrite the value on LU
basis later.
Allows the controller to select an alternate gateway
interface port if the primary path fails . Ent er the
fc srp-gl obal itl
command with this keyword to enable
this feature. Otherwise, inclu de th e
no
keyword at the
beginning of the command string to disable this feature. If
you enable this policy, you implicitly disable port load
balancing and dynamic path affinity.
dynamic-gateway-port-loadbalancing SRP global defaults for LUs of random/sequential access
devices.
Default for random devices: true
Default for sequential devices: false
This value is applied to LU entries as their default setting
at entry creation time. You can overwrite the value on LU
basis later.
Allows data to be sent between the initiator and Fibre
Channel target using all available ports on the gateway
interface. Port selection relies upon comparative I/O
traffic. The controller attempts to distribute traffic equally
between the ports. Enter the
fc srp-g lobal itl
command
with this keyword to enable this feature. Otherwise, include
the
no
keyword at the beginning of the command string to
disable this feature. If you enable this policy, you implicitly
disable port failover and dynamic path affinity.