2-63
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter2 Administrative Commands
shutdown
shutdown
Use the shutdown command to disable any of the following:
•A specific interface card or port
•An Ethernet Management port
•An InfiniBand Management port
•A power supply
Enter the
shutdown
command in the appropriate configuration submode. To enable any of th ese
elements, use the
no
form of this command.
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Card Configuration (config-card) submode, Ethernet Management Interface Configuration
(config-int-mgmt-ethernet) submode, InfiniBand Management Interfa ce C onfigur ati on
(config-int-mgmt-ib) submode, Ethernet Interface Configuration (config-if-ether) submode, InfiniBand
Interface Configuration (config-if-ib) submode, Fibre Channel Interfac e Co nfigurat ion (c onfig-if- fc )
submode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted or card-specific read-write user.
Enabling/Disabling a card:
Before you use the
action
command on a card, you must enable (bring up) the card . To enable or disable
a card, follow these steps:
Step1 In User Exec mode, enter the
enable
command to enter Privileged Exec mode.
Step2 Enter the
configure terminal
command to enter Global Configuration mode.
Step3 Enter the
card
command and specify the card or cards that you want to enable.
Step4 Enter the
shutdown
command or the
no shutdown
command to disable or enable the cards that y ou
specified in the previous step.