6-57
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Commands
show fc srp initiator-wwpn-view
show fc srp initiator-wwpn-view
To display SRP targets that an initiator can access through one of its virtual ports, enter the
show fc srp initiator-wwpn-view
command in User Exec mode or Privileged Exec mode.
show fc srp initiator-wwpn-view
wwpn
target
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
Use this command to verify that your initiator connects to all of the targets that you configured for it.
Table 6 -21 describes the fields in the
show fc srp initiator-wwpn-view
command output.
wwpn World-wide port name (WWPN) of the virtual port of the initiator.
target Displays the targets that your initiator can access through the virtual port.
Table6-21 show fc srp initiator-wwpn-view Command Field Descriptions
Field Description
wwpn World-wide port name (WWPN) of the target port that the initiator can access
through the virtual port.
wwnn World-wide node name (WWNN) of the target.
description Description of the target.
ioc-guid GUID of the I/O controller of the target.
service-name Service name of the target.
protocol-ids Protocols that the target supports.
fc-address Fibre Channel address of the target.
mtu Maximum transmission unit (MTU), in bytes, of the target.
connection-type Displays nl-port to indicate a virtual FC port.
physical-access P hysica l FC po rt ( in sl ot# /port # fo rmat ) of t he virt ual po rt.