2-34
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter2 Administrative Commands
enable
enable
To enter Privileged Exec mode from User Exec mode, enter the
enable
command in User Exec mode.
To enable a trunk group, enter the
enable
command in Trunk Interface Configuration submode.
enable
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Trunk Interface Configuration (config-if-trunk) mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Enter the
enable
command in User Exec mode to make administrative configuration changes to yo ur
Server Switch. Enter the
enable
command in Trunk Interface Configuration submode to activate a trunk
group.
Examples The following example enters Privileged Exec mode from User Exec mode:
SFS-7000P> enable
SFS-7000P#
The following example enables a new trunk group:
SFS-7000P(config-if-trunk)# enable
Related Commands config TACACS-server host
disable
exit