3-10
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter3 Fibre Channel Commands
fc srp itl
Defaults Default values and behaviors appear in the Syntax Description and Table 3-1 on page 3-11.
Command Modes Global Configuration (config) mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel rea d-w rit e u ser.
The
fc srp itl
command configures new ITLs and sets policies to control access that the SCSI RDMA
Protocol (SRP) initiator has to the Fibre Channel storage devices on a per-lun basis. An
“initiator-target-lun” (ITL) identifies a fully-configured link between an initiator and storage.
all Specifies all ports.
lun-policy Permits the initiator to access the LUN or denies the initiator access to the
LUN.
io-hi-mark The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
mark The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
max-retry The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
retry The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
min-io-timeout The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
timeout The
fc srp itl
command no longer supports this syntax. This syntax appears
for legacy purposes.
srp-lunid Specifies a LUN ID called the SRP LUN ID to which you map an existing FC
LUN ID. Essentially, this keyword creates an alias LUN ID.
lunid SRP LUN ID that maps to an existing FC LUN ID. This value appears in the
srp-lunid field of the
show fc srp itl
command output.
logical-id Specifies the FC LUN ID to map to the SRP LUN ID.
logical-id Complete Logical ID (entered without colons, as per the example below) of
the LU that maps to the user-created SRP LUN ID. This value appears in the
fc-lunid field of the
showfc srp itl
command output.