7-220
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter7 Diagnostic Commands
data-size
data-size
Configure the data size property of your test to customize th e size of packets, frames, or IB packets that
your Server Switch uses for your test. To configure the payload size of an interface, enter the data-size
command in Interface Diagnostic Configuration submode. To clear the data si ze, use the no form of this
command.
data-size size
no data-size size
Syntax Description Data size defaults to 4 octets.
Command Modes Interface Diagnostic Configuration submode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted and general read-write user.
Examples The following example configures the payload size for a di agnos ti c t est :
SFS-7000P(config-diag-if-fc-4/1)# data size 8
Related Commands diagnostic
show interface ethernet
show interface fc
show interface gateway
start
stop
test
size Integer value that represents the payload size, in octets.