
6-20
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Comma nds
show card
Note When you run the show card command on a Cisco SFS 7008, an asterisk (*) next to the slot number
identifies the controller card on which you executed this command. The asterisk does not ide ntify t he
normal or standby controllers. That information appears in the oper code column.
Examples This example displays the configuration and status informa tio n for c ards 5, 9, 1 4, and 16:
SFS-7000P# show card 5,9,14,16
============================================================================
Card Information
============================================================================
admin oper admin oper oper
slot type type status status code
----------------------------------------------------------------------------
5 en4port1G en4port1G up up normal
9 fc2port2G fc2port2G up up normal
14 controller controller up up normal
16 ib12port4x ib12port4x up up normal
============================================================================
Card Boot Information
============================================================================
boot boot boot
slot stage status image
----------------------------------------------------------------------------
5 done success OS-1.1.2/build084
9 done success OS-1.1.2/build084
14 done success OS-1.1.2/build084
16 done success OS-1.1.2/build084
boot status Boot Status may appear as any of the following:
��upgrading
•success
•failed
•badVersion
•badCrc
•memoryError
•outOfSpace
•programmingError
•hardwareError
•fileNotFound
•inProgress
boot image Displays the active system image that the card runs when it boots.
product serial-number Displays the factory-assigned product serial number of the card.
pca serial-number Displays the Printed Circuit-Assembly (PCA) serial number of the card.
pca number Displays the Printed Circuit-Assembly (PCA) assembly number of the card.
fru number Displays the field-replaceable unit (FRU) number of the card.
Table6-8 show card Command Field Descriptions (continued)
Field Description