6-185
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Commands
show ip http
show ip http
To view the configuration of t he HTT P se rv er on you r Se rv er Sw itc h, en ter the
show ip http
command
in User Exec mode or Privileged Exec mode.
show ip http
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Ethernet read-only user.
Use this command to determine if your HTTP server actively runs on your Server Switch, and to
determine the HTTP port number that it uses.
Command Output:
Table 6 -76 describes the fields in the comman d output.
Examples The following example displays the configuration of the HTTP server on the Server Switch:
SFS-270# show ip http
================================================================================
IP HTTP Info
================================================================================
server : enabled
port : 80
polling : enabled
Table6-76 show ip http Command Output Field Descriptions
Field Description
server Displays “enabled” if you have activated the server with the
ip http server
command. Displays “disabled” if you have deactivated the server with the
no ip
http server
command.
port Displays the HTTP port number that the HTTP server uses.
polling Displays “enabled” or “disabled” to indicate polling status.