7-227
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter7 Diagnostic Commands
validate
validate
To validate diagnostic tests, enter the validate command in the appropriate Diagnostic Configuration
submode.
validate
no validate
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Diagnostic Configuration (config-diag) submode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-write user.
Examples The following example validates diagnostic tests on port 6/2:
SFS-7000P (config-diag-if-en-6/2)# validate
Related Commands diagnostic
show interface ethernet
show interface fc
show interface gateway
start
stop