6-74
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Comma nds
show host
show host
To display the DNS name servers and domain name that your Server Switch uses, enter the
show host
command in User Exec mode or Privileged Exec mode.
show host
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Fibre Channel read-only user.
Use this command to display the network domain of the chassis and the DNS servers that your Server
Switch uses to resolve network names to IP addresses.
Table 6 -28 describes the fields in the
show host
command output.
Examples The following example displays the IP addresses of the DNS servers that the Server Switch uses to
resolve host names:
SFS-7000P# show host
============================================================================
Host Information
============================================================================
name-server-one : 10.3.106.20
name-server-two : 0.0.0.0
domain-name : shasta
SFS-7000P#
Table6-28 show host Command Field Descriptions
Field Description
name-server-one IP address of the primary name server.
name-server-two IP address of the backup name server.
domain-name Host name of the Server Switch.