6-40
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Comma nds
show diagnostic interface ethernet
show diagnostic interface ethernet
To display completed or ongoing diagnostic tests for Ethernet gateway ports, enter the
show diagnostic
interface ethernet
command in User Exec mode or Privileged Exec mode.
show diagnostic interface ethernet {port | all}
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-only user.
Command Output:
Table 6 -13 describes the fields in the
show diagnostic interface ethernet
command.
port Ethernet port, in slot#/port# notation.
all Specifies all Ethernet ports on the Server Switch.
Table6-13 show diagnostic interface ethernet Command Field Descriptions
Field Description
test Test that ran or runs on the card.
port Ethernet port number, in slot#/port# notation.
validation Displays enabled or disabled to indicate validation status.
data-size Size of the test data.
data-pattern Pattern of the test data.
iterations Number of iterations of the test.
action Last action that an administrator performed on the test.
result Result of the last action that an administrator performed on the test.
percentage-completed Percentage of the test that has executed.
result-string Result of the diagnostic test.