6-108
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter6 Show Comma nds
show ib sm neighbor
show ib sm neighbor
To display the InfiniBand devices that directly connect to your Server Switch, enter the
show ib sm neighbor
command in User Exec mode or Privileged Exec mode.
show ib sm neighbor
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Command Output:
Table 6 -38 describes the fields in the
show ib sm neighbor
command output.
Table6-38 show ib sm neighbor Command Field Descriptions
Field Description
subnet-prefix 64-bit value that identifies the InfiniBand subnet to which this neighbor node
belongs.
local-node-guid 64-bit GUID of the InfiniBand node.
local-port-id Port ID of the InfiniBand node. You must enter an integer between 0 and 255.
local-node-type Type of the InfiniBand node. The value appears as channel-adapter, switch, or
router.
remote-node-guid 64-bit GUID of the neighboring InfiniBand node to which the local node links.
remote-port-id Port ID of the neighboring InfiniBand node to which the local node links. You
must enter an integer between 0 and 255.
remote-node-type Type of the neighboring InfiniBand node. The value appears as
channel-adapter, switch, or router.
link-state State of the link between the local and neighboring nodes. T he value a pp ears
as noStateChange, down, initialize, armed, or active.
link-width-active Active link width. This parameter, with LinkSpeedActive, determines the link
rate between the two connected nodes. The value appears as width1x, wi dth4x,
or width12x.