2-59
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter2 Administrative Commands
radius-server
Configure a RADIUS server to authenticate CLI user logins. Enter the
authentication
command to
enable authentication and to configure your Server Switch to authenticate with the RADIUS server. Use
the show authentication command to display the configuration of the radius server, including the
priority.
Examples The following example assigns the RADIUS server that the Server Switch can use to validate logins:
SFS-7000P(config)# radius-server host 10.5.0.100
Related Commands authentication
boot-config
clock set
show authentication
snmp-server
config TACACS-server host