Cisco Systems A03D600GA2, CPDX650K9 manual Intercom calls, Sign in and out of hunt groups

Calling tasks

Intercom calls

Sign in and out of hunt groups

Procedure

Step 1 Tap Sign In. You are now signed into the Hunt Group.

Step 2 Tap Sign Out.

Intercom calls

You can place an intercom call to a target phone that autoanswers the call in speakerphone mode with mute enabled (whisper mode). The one-way intercom call allows you to deliver a short message to the recipient. The audio plays on the handset or headset, if one of these is in use. Any current call activity that your recipient is engaged in continues simultaneously.

When you receive an intercom-alert tone, you can choose one of these options:

•Listen to the caller with your microphone muted (you can hear the caller, but the caller cannot hear you).

•End the intercom call by tapping End Call with the intercom call in focus. Take this action if you do not want to hear the message.

•To talk to the caller, tap the active intercom button and use either the handset, headset, or speaker. The intercom call becomes a two-way connection (connected mode) so that you can converse with the caller.

When you use the intercom feature, be aware of the following:

•From an intercom line, you can only dial other intercom lines.

•You can use only one intercom line at a time.

•When monitoring or recording of your active call is taking place, you can receive or place intercom calls.

•You cannot place an intercom call on hold.

Note If you sign in to the same phone on a daily basis with your Cisco Extension Mobility profile, ensure that your system administrator assigns the phone button template that contains intercom information to this profile and assigns the phone as the default intercom device for the intercom line.

	Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)
44	OL-28931-01