B-49
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
AppendixB Error Mess ages
Cisco MGM Client Error and Warning Messages
Error Message EID-857: Failed to provision L2 service.
Recommended Action If the topology is not synchronized, close the L2 service wizard and try again
after the topology synchronization is complete. If there is an invalid username or password, make
sure that the username and password configured in the ML-series card are synchronized with the NE
username and password. Close the L2 service wizard and try again. Check the command-line
interface (CLI) configuration on all ML-series cards in the topology and retry the operation. If the
problem persists, contact Cisco technical support.
Error Message EID-859: Failed to modify L2 service.
Recommended Action If the topology is not synchronized, close the L2 service wizard and try again
after the topology synchronization is complete. If there is an invalid username or password, make
sure that the username and password configured in the ML-series card are synchronized with the NE
username and password. Close the L2 service wizard and try again. Check the CLI configuration on
all ML-series cards in the topology and retry the operation. If the problem persists, contact Cisco
technical support.
Error Message EID-860: Failed to add drops to L2 service.
Recommended Action If the topology is not synchronized, close the L2 service wizard and try again
after the topology synchronization is complete. If there is an invalid username or password, make
sure that the username and password configured in the ML-series card are synchronized with the NE
username and password. Close the Add/Delete Drops wizard and try again. Check the CLI
configuration on all ML-series cards in the topology and retry the operation.
Error Message EID-861: Failed to add drops to L2 service.
Recommended Action If the topology is not synchronized, close the L2 service wizard and try again
after the topology synchronization is complete. If there is an invalid username or password, make
sure that the username and password configured in the ML-series card are synchronized with the NE
username and password. Close the Add/Delete Drops wizard and try again. Check the CLI
configuration on all ML-series cards in the topology and retry the operation.
Error Message EID-862: No L2 service is selected to modify drops. Select an L2
service.
Recommended Action Select an L2 service.
Error Message EID-863: Select only one L2 service from the table.
Recommended Action Select one L2 service.
Error Message EID-865: No L2 service is selected to modify. Select an L2 service.
Recommended Action Select one L2 service.