B-50
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
AppendixB Error Messages
Cisco MGM Client Error and Warning Messages
Error Message EID-866: Select only one L2 service from the table.
Recommended Action Select one L2 service.
Error Message EID-868: No L2 service is selected to show drops. Select an L2 service.
Recommended Action Select one L2 service.
Error Message EID-869: Select only one L2 service from the table.
Recommended Action Select one L2 service.
Error Message EID-871: PIR should be greater than or equal to CIR.
Recommended Action Enter a PIR value that is greater than or equal to CIR.
Error Message EID-872: Max PIR burst should be greater than or equal to max CIR burst.
Recommended Action Enter a PIR that is greater than or equal to the maximum CIR burst.
Error Message EID-873: Failed to modify drops on the L2 service.
Recommended Action If the topology is not synchronized, close the L2 service wizard and try again
after the topology synchronization is complete. If there is an invalid username or password, make
sure that the username and password configured in the ML-series card are synchronized with the NE
username and password. Close the Add/Delete Drops wizard and try again. Check the CLI
configuration on all ML-series cards in the topology and retry the operation.
Error Message EID-874: Failed to modify these drops on the L2 service.
Recommended Action If the topology is not synchronized, close the L2 service wizard and try again
after the topology synchronization is complete. If there is an invalid username or password, make
sure that the username and password configured in the ML-series card are synchronized with the NE
username and password. Close the Add/Delete Drops wizard and try again. Check the CLI
configuration on all ML-series cards in the topology and retry the operation.
Error Message EID-875: Please select at least one drop to delete.
Recommended Action Select at least one drop to delete to complete the delete drop port operation.
Otherwise, cancel the delete drop port operation.
Error Message EID-876: Please select at least one new drop to add.
Recommended Action Select at least one drop to add to complete the add drop port operation.
Otherwise cancel the add drop port operation.