Recommended Action Recreate the circuit | Cisco Systems OL-5461-02

Appendix B Error Messages

Cisco MGM Client Error and Warning Messages

Error Message EID-722: Circuits must be created between two nodes that are in service and available. Recreate the circuit.

Recommended Action Recreate the circuit.

Error Message EID-723: Links cannot be created between two offview nodes. Recreate the link.

Error Message EID-724: Exception occurred while launching the Circuit Table.

Recommended Action An error occurred while launching the Circuit Table. Try to relaunch the

Circuit Table.

Error Message EID-725: Enter a valid link name with 1 to 256 characters.

Recommended Action Enter a valid link name that contains 1 to 256 characters.

Error Message EID-726: Enter a valid link description with 1 to 256 characters.

Recommended Action Enter a valid link description that contains 1 to 256 characters.

Error Message EID-727: Enter a valid link name with 1 to 64 characters and a link description with 1 to 256 characters.

Recommended Action Enter a valid link name and link description.

Error Message EID-728: There is no support for this model yet.

Recommended Action The network element software version is not supported. Contact Cisco’s

Technical Support for more information.

Error Message EID-731: Action was not completed or was partially completed.

Recommended Action A link already exists with the same name. Create a link with a unique name.

Error Message EID-732: Source and destination nodes cannot be the same. Choose a different destination node.

	OL-5461-02	B-45