B-24
Cisco Media Gateway Manager 5.0 User Guide
OL-5461-02
AppendixB Error Messages
Cisco MGM Client Error and Warning Messages
Error Message EID-408: Error occurred while reading the DS1 port configuration from
the database. The data shown may be inconsistent with the network element's actual
configuration.
Recommended Action Wait for a few minutes; then, click the Refresh Data tool to refresh the view.
Error Message EID-409: Error occurred while reading the OC-3 configuration from the
database. The data shown may be inconsistent with the network element's actual
configuration.
Recommended Action Wait for a few minutes; then, click the Refresh Data tool to refresh the view.
Error Message EID-410: Error occurred while reading the cross-connect configuration
from the database. The data shown may be inconsistent with the network element's
actual configuration.
Recommended Action Wait for a few minutes; then, click the Refresh Data tool to refresh the view.
Error Message EID-411: Error occurred while specifying filter parameters for DS1
ports on the Cross-Connect Table.
Recommended Action Wait for a few minutes; then, click the Refresh Data tool to refresh the view.
Error Message EID-412: Error occurred while specifying filter parameters for
Ethernet ports on the Cross-Connect Table.
Recommended Action Wait for a few minutes; then, click the Refresh Data tool to refresh the view.
Error Message EID-414: Error occurred while connecting to the remote console.
Recommended Action The NE is not available. Verify that the client can reach the NE and retry.
Error Message EID-420: Error occurred while reading the STM-1 configuration from the
database. The data shown may be inconsistent with the network element’s actual
configuration.
Recommended Action Wait for a few minutes; then, click the Refresh Data tool to refresh the view.
Error Message EID-421: Error occurred while reading the VC4 configuration from the
database. The data shown may be inconsistent with the network element’s actual
configuration.
Recommended Action Wait for a few minutes; then, click the Refresh Data tool to refresh the view.