Cisco Systems OL-5461-02 appendix Recommended Action Delete the associated topologies

Appendix B Error Messages

Cisco MGM Client Error and Warning Messages

Error Message EID-942: Delete job already in progress on the selected circuit(s). Wait until the job completes.

Recommended Action You cannot delete this circuit because the delete request has been submitted on this circuit already.

Error Message EID-943: Circuit deletion failure.

Recommended Action Cisco MGM reports this error message if any associated cross-connections from the NEs could not be deleted. Cisco MGM places the circuit in an Incomplete state. Try to delete this circuit again or take the appropriate action described by the failure event.

Error Message EID-943: Circuits involving ML cards cannot be deleted. Delete associated topologies.

Recommended Action Delete the associated topologies.

Error Message EID-944: Delete drop failure.

Recommended Action Click the Refresh Data tool to refresh the list of existing drops. Wait for the circuit to change to the ACTIVE or DROP_PENDING state and try again. Alternately, the node might be down or initializing. Wait for the node to come up or finish its initialization and try again.

Error Message EID-945: No adjacent nodes for the selected node.

Recommended Action Verify that there is at least one link from the selected node to the other nodes.

Error Message EID-946: No available links between the selected nodes.

Recommended Action Verify that there is at least one link between the selected nodes.

Error Message EID-947: Editing the UPSR attributes failed.

Recommended Action No action is required.

Error Message EID-947: Editing the SNCP attributes failed.

Recommended Action Contact your system administrator.

Error Message EID-948: Change the circuit name and retry.

Recommended Action Enter a unique circuit name.

Cisco Media Gateway Manager 5.0 User Guide

OL-5461-02 B-55